Openings
Solid Covers
Drain water from winter cover.
Remove Leaves and other debris from cover.
Add cover cleaning chemical to cover and brush clean (in most cases while the cover is still on the pool [if there is proper ballast] ).
Blow up cover and rinse cover using customers water supply.
Remove cover fold and store (preferably in a large barrel with lid).
Empty water bags fold and store (preferably in a large barrel with lid).
Reactivate filtration system (installing filter plugs, pump plugs & gauges) and check for motor trouble.
Reinstall ladders, dives, rope floats etc.
Hose off (if there is adequate water pressure) or blow off concrete around pool.
Clean pool using our pump system to the street, removing worms and other debris that might have gotten under cover (excessive debris removal is extra charge)
Using our own testing device we start your system to check for leaks in the filtering system and run the heater for 2 to 4 minutes (if applicable). Our testing device is used when pool water is level is too low to run normally.
We check our check list to be sure all items were performed in the opening
Add chemicals to water
Note: any parts needed at extra cost to customer
Mesh Covers
Remove debris from cover if needed.
Remove cover fold and store (preferably in issued safety cover bag)
Reactivate filtration system (installing filter plugs, pump plugs & gauges) and check for motor trouble.
Reinstall ladders, dives, rope floats etc.
Hose off (if there is adequate water pressure) or blow off concrete around pool.
Clean pool using our pump system to the street, removing worms and other debris that might have gotten under cover (excessive debris removal is extra charge)
Using our own testing device we start your system to check for leaks in the filtering system and run the heater for 2 to 4 minutes (if applicable). Our testing device is used when pool water is level is too low to run normally.
We check our check list to be sure all items were performed in the opening
Add chemicals to water
Note: any parts needed at extra cost to customer
Above Grounds
Drain water from winter cover.
Remove Leaves and other debris from cover.
Add cover cleaning chemical to cover and brush clean (in most cases while the cover is still on the pool [if there is proper ballast] ).
Remove cover fold and store (preferably in a large barrel with lid).
Empty water bags fold and store (preferably in a large barrel with lid). (if applicable)
Reactivate filtration system (installing filter plugs, pump plugs & gauges) and check for motor trouble.
Reinstall ladders, rope floats etc.
Clean pool using our pump system to the street, removing worms and other debris that might have gotten under cover (excessive debris removal is extra charge)
Using our own testing device we start your system to check for leaks in the filtering system and run the heater for 2 to 4 minutes (if applicable). Our testing device is used when pool water is level is too low to run normally.
We check our check list to be sure all items were performed in the opening
Add chemicals to water
Note: any parts needed at extra cost to customer
Closings
Solid Covers
Mesh Covers
Above Grounds